Mixtile 2-in-1 Zigbee & Z-Wave mPCIe Interface Module

Name: Mixtile 2-in-1 Zigbee &amp; Z-Wave mPCIe Interface Module
SKU: 5812
Availability: InStock

$266.90 - $1,946.50

Compatible with Zigbee/Thread/Matter and Z-Wave

Mixtile 2-in-1 Zigbee & Z-Wave mPCIe Interface Module is designed for Home Assistant users and developers. It offers easy connectivity with Zigbee and Z-Wave and will support Matter and Thread specifications with a future Mixtile firmware update. It supports Over-The-Wire (OTW) Firmware Update via the mini-PCIe interface, which allows easy and quick firmware updates for both protocols.

Mixtile 2-in-1 Zigbee & Z-Wave mPCIe Interface Module is compatible with any IoT gateway and PC with the mini-PCIe interface and runs the Home Assistant. It also works seamlessly with our Mixtile Edge 2 套装 IoT gateway. Mixtile Edge 2 套装 is a high-performance, low-power gateway that supports Android 11 and Linux operating systems. Featuring multiple network connections of Wi-Fi 6, Bluetooth 5.0, Cellular, LoRa, Zigbee and others, it also reserves peripheral ports including M.2, mini-PCIe, RS-485, CAN and UART. It has pre-installed Home Assistant.

Mixtile also provides external Zigbee and Z-Wave antennas, offering the advantages of high-speed and stable signals. The antennas effectively increase signal strength and extend the range over long distances. Additionally, it features a 15 cm SMA to IPX MHF coax cable, allowing for easy installation in various enclosures.

Mixtile 2-in-1 Module Tutorials

>>> Complete the Mixtile Survey and Get 10% OFF Coupon！<<<

* In stock; Ship immediately

SKU：不适用类别配件

说明
其他信息

Description

Mixtile 2-in-1 Zigbee & Z-Wave mPCIe Interface Module is an EFR32 Series 2 (Silicon Labs EZSP v8) adapter that transmits at a power of +20 dBm. When plugged into a standard mini-PCIe interface, it supports full-speed USB 2.0.

Mixtile 2-in-1 Zigbee & Z-Wave mPCIe Interface Module is based on a Silicon Labs EFR32MG24 SoC with an IEEE 802.15.4 multi-protocol 2.4GHz radio MCU and Silicon Labs EFR32ZG23 SoC with Sub-GHz radio MCU.

EFR32MG24 is capable of concurrently running both Zigbee 3.0 (EmberZNet/EZSP) and Thread (OpenThread/Matter/CHIP over Thread) stacks/protocols at the same time by using firmware in RCP (Radio Co-Processor) mode. EFR32ZG23 is capable of running Z-Wave protocol.

规格

Power Supply: 3.3V
Interface: mini-PCIe (Use USB Lines)
Transceiver 1: Silabs EFR32MG24
- Frequency: 2.4 GHz
- TX Power: up to +19.5 dBm
- RX sensitivity: -105.4 dBm （250 kbps）
- Protocols: Zigbee, Matter, Thread
Transceiver 2: Silabs EFR32ZG23
- Frequency: sub-1 GHz
- TX Power: up to +14 dBm
- RX sensitivity: -109.9 dBm （9.6 kbps）
- Protocol: Z-Wave
Antenna: 2x IPEX-1 antenna connector (one for Zigbee, one for Z-Wave)

Z 波区域	868.4, 869.85 MHz EU, 908.4, 916.0 MHz US, 919.8~ 926.3 MHz ANZ
Mixtile 2-in-1 Module	100 pcs/pack with External Antennas [15% OFF], 100 pcs/pack without External Antennas [15% OFF], 1pc with External Antennas + (2GB+16GB)Mixtile Edge 2 Kit Gateway [$10 OFF], 1pc with External Antennas + (4GB+32GB) Mixtile Edge 2 Kit Gateway [$10 OFF], 50 pcs/pack with External Antennas [10% OFF], 50 pcs/pack without External Antennas [10% OFF]

Mixtile 2-in-1 Zigbee & Z-Wave mPCIe Interface Module

Description

相关产品

登录