Description
Mixtile 2-in-1 Zigbee & Z-Wave mPCIe Interface Module is an EFR32 Series 2 (Silicon Labs EZSP v8) adapter that transmits at a power of +20 dBm. When plugged into a standard mini-PCIe interface, it supports full-speed USB 2.0.
Mixtile 2-in-1 Zigbee & Z-Wave mPCIe Interface Module is based on a Silicon Labs EFR32MG24 SoC with an IEEE 802.15.4 multi-protocol 2.4GHz radio MCU and Silicon Labs EFR32ZG23 SoC with Sub-GHz radio MCU.
EFR32MG24 is capable of concurrently running both Zigbee 3.0 (EmberZNet/EZSP) and Thread (OpenThread/Matter/CHIP over Thread) stacks/protocols at the same time by using firmware in RCP (Radio Co-Processor) mode. EFR32ZG23 is capable of running Z-Wave protocol.
Specifications
- Power Supply: 3.3V
- Interface: mini-PCIe (Use USB Lines)
- Transceiver 1: Silabs EFR32MG24
- Frequency: 2.4 GHz
- TX Power: up to +19.5 dBm
- RX sensitivity: -105.4 dBm （250 kbps）
- Protocols: Zigbee, Matter, Thread
- Transceiver 2: Silabs EFR32ZG23
- Frequency: sub-1 GHz
- TX Power: up to +14 dBm
- RX sensitivity: -109.9 dBm （9.6 kbps）
- Protocol: Z-Wave
- Antenna: 2x IPEX-1 antenna connector (one for Zigbee, one for Z-Wave)
