You can upgrade firmware of Mixtile Core 3588E (hereinafter referred to as Core 3588E) using either an RK image or a raw image in Loader or MaskROM mode. This document describes how to upgrade the firmware of Core 3588E using a Rockchip format image on macOS, and Ubuntu in Loader and MaskROM modes.
重要:
Back up data before a firmware upgrade, because all user data is deleted after the firmware upgrade.
注:
Core 3588E has three boot modes: Normal, Loader, and MaskROM. Loader and MaskROM modes are for firmware upgrade.
準備
ファイル
Upgrade tools
- macOS: upgrade_tool_v2.3_mac.zip
- Ubuntu： Linux_Upgrade_Tool_v1.65.zip
デバイスとアクセサリー
- コア3588Eボード
- A carrier board that is compatible with Jetson TX2 NX (carrier board Leetop A206 is used in this document)
- A computer: macOS, or Ubuntu
- A micro USB cable
- A 2.54-mm jumper cap
ハードウェアの接続
1. Fix Core 3588E onto the carrier board with the notch aligned. Then fasten the two screws.
2. Connect one end of the power adapter to the power jack of the carrier board and the other end to a live outlet.
3. Connect one end of the micro USB cable to the micro USB port of the carrier board and the other end to your computer.
Upgrade firmware in Loader mode (recommended)
macOSの場合
Step 1. Enable Core 3588E to enter Loader mode
Choose one of the following two options:
Option 1: Unplug the power adapter, use the jumper cap to connect the FCREC そして GND pins, and plug the power adapter again.
Option 2: If your computer has ADB tool, start a terminal and input adb reboot loader.
Step 2. Download the upgrade tool and grant permission to it
2.1 Click upgrade_tool_v2.3_mac.zip をクリックしてアップグレードツールをダウンロードしてください。
2.2 Go to the folder アップグレードツール_v2.3_Mac after unzipping the package. Grant permission to the tool by running the sudo chmod u+x upgrade_tool コマンドを使用している。
2.3 次へナビゲートする システム環境設定 > セキュリティとプライバシー を実行し、このファイルがあなたのコンピューター上で実行されるようにします。
フォルダの下 アップグレードツール_v2.3_Mac, you can run the sudo ./upgrade_tool command to check whether Core 3588E has entered Loader mode. The following is an example of the command output:
Program Log will save in the /Users/mia/upgrade_tool/log/
List of rockusb connected
DevNo=1 Vid=0x2207,Pid=0x350b,LocationID=442 Mode=Loader SerialNo=4998310c6679ec2
Found 1 rockusb,Select input DevNo,Rescan press <R>,Quit press <Q>:Step 3. Upgrade Rockchip image
3.1 Under the folder アップグレードツール_v2.3_Mac, run the sudo ./upgrade_tool uf [image path].img command. The following is an example:
sudo ./upgrade_tool uf /Downloads/image-release-rockchip-format-mixtile-core3588e-ubuntu-desktop-rc-0.0.3-231227.imgUbuntuの場合
Step 1. Enable Core 3588E to enter Loader mode
Choose one of the following two options:
Option 1: Unplug the power adapter, connect the FCREC そして GND pins using the jumper cap, and plug the power adapter again.
Option 2: If your computer has ADB tool, start a terminal and input adb reboot loader.
Step 2. Download the upgrade tool and grant permission to it
2.1 Click Linux_Upgrade_Tool_v1.65.zip をクリックしてアップグレードツールをダウンロードしてください。
2.2 Go to the folder Linux_Upgrade_Tool_v1.65 after unzipping the package. Grant permission to the tool by running the chmod u+x upgrade_tool コマンドを使用している。
フォルダの下 Linux_Upgrade_Tool_v1.65, you can run the sudo ./upgrade_tool command to check whether Core 3588E has entered Loader mode. The following is an example of the command output:
Program Data in /usr/local/bin
List of rockusb connected
DevNo=1 Vid=0x2207,Pid=0x350b,LocationID=27 Mode=Loader SerialNo=4998310c6679ec2
Found 1 rockusb,Select input DevNo,Rescan press <R>,Quit press <Q>:Step 3. Upgrade firmware
3.1 Under the folder Linux_Upgrade_Tool_v1.65, run the sudo ./upgrade_tool uf [image path].img command. The following is an example:
sudo ./upgrade_tool uf /Downloads/image-release-rockchip-format-mixtile-core3588e-ubuntu-desktop-rc-0.0.3-231227.imgUpgrade firmware in MaskROM mode
macOSの場合
Step 1. Enable Core 3588E to enter MaskROM mode
1.1 Unplug the power adapter from the carrier board.
1.2 Keep short-circuiting the two solder joints on Core 3588E, and plug the power adapter again.
Step 2. Download the upgrade tool and grant permission to it
2.1 Click upgrade_tool_v2.3_mac.zip をクリックしてアップグレードツールをダウンロードしてください。
2.2 Go to the folder アップグレードツール_v2.3_Mac after unzipping the package. Grant permission to upgrade_tool by running the command sudo chmod u+x upgrade_tool.
2.3 次へナビゲートする システム環境設定 > セキュリティとプライバシー を実行し、このファイルがあなたのコンピューター上で実行されるようにします。
フォルダの下 アップグレードツール_v2.3_Mac, you can run sudo ./upgrade_tool to check whether Core 3588E has entered MaskROM mode. The following is an example of the command output:
Program Log will save in the /Users/mia/upgrade_tool/log/
List of rockusb connected
DevNo=1 Vid=0x2207,Pid=0x350b,LocationID=442 Mode=Maskrom SerialNo=4998310c6679ec2
Found 1 rockusb,Select input DevNo,Rescan press <R>,Quit press <Q>:Step 3. Upgrade firmware
3.1 Under the folder アップグレードツール_v2.3_Mac以下のコマンドを実行する：
sudo ./upgrade_tool uf /Downloads/image-release-rockchip-format-mixtile-core3588e-ubuntu-desktop-rc-0.0.3-231227.imgUbuntuの場合
Step 1. Enable Core 3588E to enter MaskROM mode
1.1 Unplug the power adapter from the carrier board.
1.2 Keep short-circuiting the two solder joints on Core 3588E, and plug the power adapter again.
Step 2. Download the upgrade tool and grant permission to it
2.1 Click Linux_Upgrade_Tool_v1.65.zip をクリックしてアップグレードツールをダウンロードしてください。
2.2 Go to the folder Linux_Upgrade_Tool_v1.65 after unzipping the package. Grant permission to the tool by running the sudo chmod u+x upgrade_tool コマンドを使用している。
フォルダの下 Linux_Upgrade_Tool_v1.65, you can run the sudo ./upgrade_tool command to check whether Core 3588E has entered MaskROM mode. The following is an example of the command output:
Program Data in /usr/local/bin
List of rockusb connected
DevNo=1 Vid=0x2207,Pid=0x350b,LocationID=27 Mode=Maskrom SerialNo=4998310c6679ec2
Found 1 rockusb,Select input DevNo,Rescan press <R>,Quit press <Q>:Step 3. Upgrade Rockchip image
3.1 フォルダーに移動する Linux_Upgrade_Tool_v1.65 after unzipping the package, and run the following commands to start upgrading firmware:
sudo ./upgrade_tool uf /Downloads/image-release-rockchip-format-mixtile-core3588e-ubuntu-desktop-rc-0.0.3-231227.img