Installing Mixtile Add-ons for Home Assistant

Mixtile offers the following two add-ons, Mixtile Flasher and MIXTILE Z-Wave Region Configurator, to enhance Mixtile 2-in-1 Zigbee & Z-Wave mPCIe Interface Module. This guide walks you through how to install and use them to tailor to your use cases.

Introducing the add-ons

  • MIXTILE Flasher: By default, the Zigbee System on Chip (SoC) supports only the Zigbee firmware option. If you need it to support both Zigbee and Thread, you can use this add-on to re-flash its firmware. In addition, you can use MIXTILE Flasher to flash the firmware back to Zigbee-only.

  • MIXTILE Z-Wave Region Configurator: Sometimes you might want to add Z-Wave devices from other regions. In this case, you can use this add-on to change the region settings of your Z-Wave SoC.

Installing the add-ons

This guide assumes that you already have Home Assistant installed in your Mixtile Edge 2 Kit. If not, install it first by referring to Using Home Assistant in Mixtile Edge 2 Kit.

  1. Visit MIXTILE_Addons GitHub and click ADD ADD-ON REPOSITORY TO MY:

    Add-on-from-Github

  2. Input the URL of Home Assistant:

    modify_hom_assistant_url

  3. クリック Open link:

    open-add-on-link

  4. On the Manage add-on repositories page, click ADD:

    Manage-Add-on

  5. クリック 設定 in the side navigation bar, choose Add-ons, and then click ADD-ON STORE at the bottom-right corner.

    add-on-store

  6. Type "Mixtile" in the search box, and you will find that the Mixtile add-ons are not displayed. Therefore, scroll down to the end of the list and click Missing add-ons? Enable advanced mode in your user profile page:

    missing-addons

  7. Enable the Advanced mode:

    advanced-mode-enabled

  8. Repeat step 4 to go back to the ADD-ON STORE page again. You should now be able to see the Mixtile add-ons.

    Mixtile-Add-on

  9. Click the add-on you want to install, for example, MIXTILE Z-Wave Region Configurator, and click INSTALL:

    install-region-configurator

    It might take a while for the installation to complete.

Using the add-ons

To use each add-on, visit the pages below as needed:

この記事は役に立ちましたか?

関連記事

サポートが必要ですか?

お探しの答えが見つかりませんか?
サポート